Techstar Bumper Floats 2 x 8 construction are a unique combination of dock bumper and flotation.
Designed to run the length of your dock on both sides, these floats will comfortably float a dock 8 feet wide.
For docks 10 to 12 feet wide we recommend one row of center 12 inch high floats and for docks 14 to 16 feet wide we recommend 2 rows of 12 inch high center floats.
Bumper Floats /Sandstone
Features and Benefits
- Dock Bumpers are built in as part of the float.
- Foam filled with closed cell EPS (expanded polystyrene) for added security.
- Your wood frame, hardware and decking stay out of the water.
- Polyethylene is environmentally friendly, as well as gasoline and wildlife resistant.
- Construction is simple. Build a frame with corner brackets / truss brackets /anchor brackets https://www.docksplus.ca/index.php?route=product/category&path=104_28 and attach floats through molded bolt holes.
- Deck boards can sit flush with the top of the floats for a clean finish.
- Standard colour is black but Bumper Floats are also available in sandstone at an extra cost.
- TIP: Each of our Bumper Float models is 4ft long so aim to build the length of your dock in 4ft increments (8ft, 12ft, 16ft, 20ft etc.)
- 2 x 8 costruction
Model Number | Outside Dimensions | Flotation (pounds) | Average Wall Thickness | Shipping Weight | Center Float Model | Per Skid |
---|---|---|---|---|---|---|
BF-1 | 24" x 48" x 16" | 415 | .187 | 43 | AP-8 | 12 |
BF-12 | 24" x 48" x 21" | 430 | .187 | 43 | AP-12 | 12 |
BF-3 | 24" x 48" x 25" | 700 | .250 | 65 | MF-2448 | 8 |
Bolts needed to mount each float
Front: 1/2″ x 4″ carriage bolts 3/ float
Back: 1/2″ x 3 1/2″ carriage bolts 2/ float
+ 5 x 1/2″ hex nuts, flat washers, lock washers
Back: 1/2″ x 3 1/2″ carriage bolts 2/ float
+ 5 x 1/2″ hex nuts, flat washers, lock washers
TECHSTAR BUMPER FLOAT B-12SS / 24" X48" X 21" Sandstone
- Model BF-12SS
- Availability: In Stock
-
$308.95