Please call or email on this Item for the right size for your Pontoon / Price starts at $850.00 and is still half of the cost of custom unit

Manufactured with superior features, these units are sold with the frame, fabric tops and storage boots packaged separately. Frames are available in bright dip anodized aluminum or stainless steel. Stainless steel frames come with stainless steel fittings, bright dip anodized aluminum frames come with marine grade nylon hardware. Fabric tops are available in Hot Shot™, Ultima™, or Sunbrella® brand fabrics.

Selecting the Right Bimini Top & Frame

Choosing the right fender size and quantity of fenders is critical to protecting your boat. The Taylor Made boat size chart is the minimum recommendation and it is advised to consult with your marina and docking neighbors to be sure you have adequate protection for prevailing conditions.

Step 1 - Select the Frame

1. Determine the length:  8'.
2. Determine the height:   54". This is the maximum standing height under the frame; measured from the mounting location points.
3. Determine the width:  96".
a. Measure from the mounting point on one side of the boat, to the same location on the opposite side of the boat (this is not the same as “beam width” or boat width).
b. Widths of the Bimini Boat Tops are specified in increments of 6" (choose the width that best matches your mounting point measurement).
c. Frames are designed as “knock-down” frames, meaning they snap together via double-sided snap buttons.
d. 4-Bow: This refers to the number of bows that make up the frame.6 ft. length tops, and 4-bow for 8 ft. long tops.
e. All sizes ship unembarrassed, via UPS or FedEx.

Step 2 - Select the Fabric

only available in Grey and Sand  

From the economical Hot Shot™ pigment-dyed fabric  All of our fabric choices are treated for water repellent and mildew resistance to withstand the harsh marine environment.